Are you clear about the safety requirements of mechanical processing on equipment?

For Jinan machining equipment, about its safety requirements, mainly including: the main structure of the requirements, the requirements of the control mechanism, the requirements of the guard and the requirements of inspection and maintenance of the four parts of the content, because the large machining contains a lot of content, so today first introduced one of the part, for the main structure of the requirements, about this part of the content, and contains many knowledge points, the following on to introduce specific one by one classification.

Machining equipment must have sufficient strength, stiffness, stability and safety factors and life, to ensure the safety of people and equipment, specifically

1.Material

The materials used in the machining equipment itself should meet the safety and health requirements, do not allow the use of materials harmful to human health and materials that have not been tested for safety and health.

2.Shape

The shape and structure of the machining equipment should be as flat and smooth as possible, avoiding sharp corners and edges.

3.Processing area

1. Where the processing area is prone to injury equipment, effective protective measures should be taken.

2. Protective measures should ensure that the equipment in working condition to prevent the operator's body from entering the danger zone, or into the danger zone to ensure that the equipment can not run (line) or for emergency braking.

3. Machining equipment should be used individually or simultaneously the following protective measures.

(1) fully fixed, semi-fixed enclosures.

(2) mechanical or electrical barriers.

(3) mechanical or electrical interlocking devices.

(4) Automatic or semi-automatic feeding and discharging devices.

(5) Hand restrictors, hand disengagement devices.

(6) Mechanical or electrical two-hand disengagement device.

(7) Automatic or manual emergency stop devices.

(8) Devices for limiting strokes, feeds or feeds that result in danger.

(9) Devices to prevent malfunction or misoperation.

(10) Warning or alarm devices.

(11) Other protective measures.