How to maintain the quality of machining?

It is very important to ensure the quality in the process of precision machining. Jinan machining refers to the process of changing the overall dimension or performance of the workpiece through a mechanical device. According to the difference in processing methods, it can be divided into cutting and pressure processing to ensure the quality of the processing, which can reduce the faults used in the future. There are many and precise procedures in machining, and there are many problems that need our attention in processing, Next, how to ensure the quality of Jinan machining and the problems needing attention in Jinan machining processing.

1、How to Maintain Quality in Jinan Machining

1. It controls the quality of raw materials during machining.

2. Civilized production: It is a passive method to remove burrs and bruises before assembling the gearbox

3. During normalizing or quenching and tempering, the furnace temperature must be kept uniform, and the work pieces must be heated and cooled uniformly by using working position instruments. It is strictly prohibited to stack them together.

4. Machining needs to control the accuracy of gears and the basic requirements of gear accuracy.

5. Prevent heat treatment deformation: gear blank shall be formed into precision forging after rough machining, and then be normalized or quenched and tempered.

2、Problems needing attention in machining in jinan

1. In order to ensure the machining accuracy, rough and finish machining should be carried out separately.

2. Reasonably select equipment: rough machining shall be carried out on a machine tool with high power and low precision, while finishing process requires a machine tool with high precision..

3. Heat treatment process is often arranged in Jinan machining process route.

The above is all about Jinan machining. I hope it can help you. If you want to know more, please pay attention to our website. Thank you for your reading.